I have a Yamaha DGX-620. I was replacing the Power Jack and I accidentally disconnected the power cable from the Power Board that leads to the LCD Backlight. The connector is a small white 2 prong female connector. The pins are just sticking up out of the board and the white connector isn’t attached to the wires. I don’t know if I need a special crimping tool or something so if someone recognizes this connector type, please help!
In the service manual, it’s labeled as follows:
Diagram number 8
Location: 290
Part No. WB092100
Connector Assembly: BL AM-CN102
On the connector, the following letters and numbers are etched on the side:
MXL32
521436