# Jupiter 50 Limited Pitch Bend Range After Bend Pot Replacement

**URL:** <https://forums.syntaur.com/t/jupiter-50-limited-pitch-bend-range-after-bend-pot-replacement/5177>\
**Category:** Synth Repair\
**Created:** [January 27, 2023, 2:50pm UTC](https://forums.syntaur.com/t/jupiter-50-limited-pitch-bend-range-after-bend-pot-replacement/5177 "2023-01-27T14:50:27Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![KimberlyP](https://forums.syntaur.com/letter_avatar_proxy/v4/letter/k/91b2a8/32.png) [@KimberlyP](https://forums.syntaur.com/u/KimberlyP)\
**Post date:** [January 27, 2023, 2:50pm UTC](https://forums.syntaur.com/t/jupiter-50-limited-pitch-bend-range-after-bend-pot-replacement/5177/1 "2023-01-27T14:50:27Z")

</div>

The pitch bender on one of my Jupiter 50’s became erratic after being stored for several months, so I purchase part #3029 and replaced it. However, it now has very little pitch bend range. Is it possible I was sent a log taper instead of a linear taper? Just so I don’t have to pull it apart again to see if that is the problem and have it sit until another part arrives, I was hoping if someone might have experience with this and be able to provide some input.

Thanks.