# KORG microsampler key repair

**URL:** <https://forums.syntaur.com/t/korg-microsampler-key-repair/3129>\
**Category:** Synth Repair\
**Created:** [June 4, 2021, 9:58pm UTC](https://forums.syntaur.com/t/korg-microsampler-key-repair/3129 "2021-06-04T21:58:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![seeminglyhuman](https://forums.syntaur.com/letter_avatar_proxy/v4/letter/s/c2a13f/32.png) [@seeminglyhuman](https://forums.syntaur.com/u/seeminglyhuman)\
**Post date:** [June 4, 2021, 9:58pm UTC](https://forums.syntaur.com/t/korg-microsampler-key-repair/3129/1 "2021-06-04T21:58:11Z")

</div>

I want to correct some internal noises on my KORG MS1 (microsampler)

These things were discontinued a while back and I can’t find a service manual anywhere. The problems arise from the keybed and the LED display. Has anyone taken one of these apart? I consider myself mechanically inclined, but these MS1s seem pretty quirky - is there anything I should consider if I want access to the keybed and LED? How accessible are these areas once the case has been removed?

Thanks a lot