# Moog Prodigy Pitch Bend Pot

**URL:** <https://forums.syntaur.com/t/moog-prodigy-pitch-bend-pot/9560>\
**Category:** Synth Repair\
**Tags:** moog, pitch-bend-issues, keybed-contacts\
**Created:** [September 18, 2026, 5:15pm UTC](https://forums.syntaur.com/t/moog-prodigy-pitch-bend-pot/9560 "2026-09-18T17:15:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![gorlandi](https://forums.syntaur.com/user_avatar/forums.syntaur.com/gorlandi/32/2684_2.png) [@gorlandi](https://forums.syntaur.com/u/gorlandi)\
**Post date:** [September 18, 2026, 5:15pm UTC](https://forums.syntaur.com/t/moog-prodigy-pitch-bend-pot/9560/1 "2026-09-18T17:15:58Z")

</div>

Is the 10k pitch bender pot replacement a direct pin for pin match or do the wires need to be soldered to different pins? Original on left replacement on right pins 1, 2, 3 from left to right in replacement.

 ![IMG_0579](https://forums.syntaur.com/uploads/default/original/2X/2/2190b0b23e28503f1c9105b028d8c6dc4f144500.jpeg)

---

<div class="post-metadata">

**Author:** ![sargfowler](https://forums.syntaur.com/user_avatar/forums.syntaur.com/sargfowler/32/2120_2.png) [@sargfowler](https://forums.syntaur.com/u/sargfowler)\
**Post date:** [September 19, 2026, 7:06am UTC](https://forums.syntaur.com/t/moog-prodigy-pitch-bend-pot/9560/2 "2026-09-19T07:06:17Z")

</div>

Most pots are the same pin to pin, but a quick check with a multimeter should show the same wiring between the two. It will also show if they’re both linear/log.

---

<div class="post-metadata">

**Author:** ![gorlandi](https://forums.syntaur.com/user_avatar/forums.syntaur.com/gorlandi/32/2684_2.png) [@gorlandi](https://forums.syntaur.com/u/gorlandi)\
**Post date:** [September 19, 2026, 8:11pm UTC](https://forums.syntaur.com/t/moog-prodigy-pitch-bend-pot/9560/3 "2026-09-19T20:11:12Z")

</div>

Thanks for the response and that helped me figure out it wasn’t potentiometer in the end as both read the same resistance. Something else is he problem, modulation works just no pitch bend. Trouble shooting the circuit path. Do like Moog design it’s like it was made with service in mind really easy to work on.

---

<div class="post-metadata">

**Author:** ![sargfowler](https://forums.syntaur.com/user_avatar/forums.syntaur.com/sargfowler/32/2120_2.png) [@sargfowler](https://forums.syntaur.com/u/sargfowler)\
**Post date:** [September 20, 2026, 8:06am UTC](https://forums.syntaur.com/t/moog-prodigy-pitch-bend-pot/9560/4 "2026-09-20T08:06:19Z")

</div>

At least it’s not the pot!

Manual is available from [https://midimanuals.com/manuals/moog/prodigy/service\_manual/moog\_prodigy\_service\_manual.pdf](https://midimanuals.com/manuals/moog/prodigy/service_manual/moog_prodigy_service_manual.pdf)

If you haven’t got it already