# Need help with MiniKorg K1 switch

**URL:** <https://forums.syntaur.com/t/need-help-with-minikorg-k1-switch/3314>\
**Category:** Synth Repair\
**Created:** [August 6, 2021, 9:01pm UTC](https://forums.syntaur.com/t/need-help-with-minikorg-k1-switch/3314 "2021-08-06T21:01:20Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![flywright](https://forums.syntaur.com/letter_avatar_proxy/v4/letter/f/b782af/32.png) [@flywright](https://forums.syntaur.com/u/flywright)\
**Post date:** [August 6, 2021, 9:01pm UTC](https://forums.syntaur.com/t/need-help-with-minikorg-k1-switch/3314/1 "2021-08-06T21:01:20Z")

</div>

Hello - new to the forum!

We’re repairing a Univox/MiniKorg K1 for a customer. The mode switch is functional but has both split shaft ears broken off, therefore a replacement is needed. No joy on internet searches to this point. The switch is a 1P5T 3 deck rotary.

Anyone had experience procuring a suitable sub? We are also willing to try to swap out the shaft if we can find an old part with electrical issues.