# Roland D10 check internal battery

**URL:** <https://forums.syntaur.com/t/roland-d10-check-internal-battery/1422>\
**Category:** Synth Repair\
**Created:** [January 28, 2020, 9:02pm UTC](https://forums.syntaur.com/t/roland-d10-check-internal-battery/1422 "2020-01-28T21:02:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![darenbir-9](https://forums.syntaur.com/user_avatar/forums.syntaur.com/darenbir-9/32/393_2.png) [@darenbir-9](https://forums.syntaur.com/u/darenbir-9)\
**Post date:** [January 28, 2020, 9:02pm UTC](https://forums.syntaur.com/t/roland-d10-check-internal-battery/1422/1 "2020-01-28T21:02:07Z")

</div>

I’m restoring a Roland D10 and every time I change a patch I get the display showing “check internal battery”. However, even after replacing the battery for a new one the same message keeps occuring. Any ideas? - Darren.

---

<div class="post-metadata">

**Author:** ![darenbir-9](https://forums.syntaur.com/user_avatar/forums.syntaur.com/darenbir-9/32/393_2.png) [@darenbir-9](https://forums.syntaur.com/u/darenbir-9)\
**Post date:** [January 29, 2020, 10:24am UTC](https://forums.syntaur.com/t/roland-d10-check-internal-battery/1422/2 "2020-01-29T10:24:46Z")

</div>

**UPDATE** :

> It looks like the Vref voltage line is not giving out a nominal 5V but about 0.2V, I suspect the electrolytic capacitor C92 (4.7uF/25V), which appears to smooth the output. This gives the voltage comparator a false battery low warning even though it is brand new. This would also affect the VALUE slider and the bender pot (left-right motion) too.

This will affect other Roland D-xx series too, including the D-50 although probably a different capacitor label.
