# Roland FP-10 with water damage

**URL:** <https://forums.syntaur.com/t/roland-fp-10-with-water-damage/9419>\
**Category:** Uncategorized\
**Created:** [April 24, 2026, 3:30am UTC](https://forums.syntaur.com/t/roland-fp-10-with-water-damage/9419 "2026-04-24T03:30:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![PianoMom](https://forums.syntaur.com/letter_avatar_proxy/v4/letter/p/b19c9b/32.png) [@PianoMom](https://forums.syntaur.com/u/PianoMom)\
**Post date:** [April 24, 2026, 3:30am UTC](https://forums.syntaur.com/t/roland-fp-10-with-water-damage/9419/1 "2026-04-24T03:30:04Z")

</div>

Hello, I have a fairly new (less than 2 years) Roland FP-10 keyboard. Apparently it got water damage on the high notes circuit board without my knowledge. At first only those keys acted up but then all the keys started acting up/playing wonky sounds. The shop I bought it from does not replace parts, only the whole interior which is basically the same price as new.

What are the chances it would work again if I only replaced the high note circuit board? Or would I need to replace all 3 since all the notes were going crazy?

Thanks.

---

<div class="post-metadata">

**Author:** ![sargfowler](https://forums.syntaur.com/user_avatar/forums.syntaur.com/sargfowler/32/2120_2.png) [@sargfowler](https://forums.syntaur.com/u/sargfowler)\
**Post date:** [April 25, 2026, 7:39am UTC](https://forums.syntaur.com/t/roland-fp-10-with-water-damage/9419/2 "2026-04-25T07:39:49Z")

</div>

There’s a good chance it will work if cleaned up.

Otherwise, if all the other notes are fine, then yes, a replacement part should fix it.

Do you have a photo of the damage?

---

<div class="post-metadata">

**Author:** ![PianoMom](https://forums.syntaur.com/letter_avatar_proxy/v4/letter/p/b19c9b/32.png) [@PianoMom](https://forums.syntaur.com/u/PianoMom)\
**Post date:** [April 30, 2026, 3:00am UTC](https://forums.syntaur.com/t/roland-fp-10-with-water-damage/9419/3 "2026-04-30T03:00:36Z")

</div>

Thanks. Is there a product or procedure you recommend? We are very unknowledgeable in this area.

 ![1000083656](https://forums.syntaur.com/uploads/default/original/2X/b/bf421785edf7b2801a2f9669262c99a1aab0fddf.jpeg)

---

<div class="post-metadata">

**Author:** ![sargfowler](https://forums.syntaur.com/user_avatar/forums.syntaur.com/sargfowler/32/2120_2.png) [@sargfowler](https://forums.syntaur.com/u/sargfowler)\
**Post date:** [April 30, 2026, 9:17pm UTC](https://forums.syntaur.com/t/roland-fp-10-with-water-damage/9419/4 "2026-04-30T21:17:30Z")

</div>

Oh that doesn’t look good.

Try and clean up with IPA and a cotton bud and check the components resistance against each other.

Check tracks are still intact.

Looks like you need another rubber contact strip too.