# Roland JD-800 cable

**URL:** <https://forums.syntaur.com/t/roland-jd-800-cable/6093>\
**Category:** Synth Repair\
**Created:** [August 21, 2023, 4:30am UTC](https://forums.syntaur.com/t/roland-jd-800-cable/6093 "2023-08-21T04:30:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kelper](https://forums.syntaur.com/letter_avatar_proxy/v4/letter/k/cc9497/32.png) [@Kelper](https://forums.syntaur.com/u/Kelper)\
**Post date:** [August 21, 2023, 4:30am UTC](https://forums.syntaur.com/t/roland-jd-800-cable/6093/1 "2023-08-21T04:30:23Z")

</div>

Can anyone tell me where I can get a 6-pin cable to connect the JD-800 Bender Board volume circuit to the Jack Board?

Not sure if the cable connectors were a proprietary Roland design or more generic.

I’ve attached a picture of an 8-pin version of the connector. I need 6-pin on each side.

 ![20230817_213839](https://forums.syntaur.com/uploads/default/original/2X/5/507c45a59a993d4a61c3cb56ca8d1a53f1c6ed42.jpeg)

Thank you for any info.