# Tuning Inductor coil broke on Roland MKS-30 Oscillator

**URL:** <https://forums.syntaur.com/t/tuning-inductor-coil-broke-on-roland-mks-30-oscillator/4337>\
**Category:** Uncategorized\
**Created:** [May 22, 2022, 10:54pm UTC](https://forums.syntaur.com/t/tuning-inductor-coil-broke-on-roland-mks-30-oscillator/4337 "2022-05-22T22:54:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bretb](https://forums.syntaur.com/letter_avatar_proxy/v4/letter/b/f6c823/32.png) [@Bretb](https://forums.syntaur.com/u/Bretb)\
**Post date:** [May 22, 2022, 10:54pm UTC](https://forums.syntaur.com/t/tuning-inductor-coil-broke-on-roland-mks-30-oscillator/4337/1 "2022-05-22T22:54:11Z")

</div>

Have an MKS-30 and I need to replace the tunable inductor. The markings show “204k”. The chart I used makes the value at 160000 ohms or 16 mohms. Not sure if that is correct. I found several with approximately on mouser that value but they have varying amp ratings of 7.3A to 11A, and varying inductor values 200-300. Not sure which one to use.