# \#moog

**URL:** https://forums.syntaur.com/tag/moog/66.md

[Latest](https://forums.syntaur.com/latest.md) · [Categories](https://forums.syntaur.com/categories.md) · [Tags](https://forums.syntaur.com/tags.md)

---

## [Moog Prodigy Pitch Bend Pot](https://forums.syntaur.com/t/moog-prodigy-pitch-bend-pot/9560)

<div class="topic-metadata">

**Author:** [@gorlandi](https://forums.syntaur.com/u/gorlandi)\
**Replies:** 3\
**Last updated:** [September 20, 2026, 8:06am UTC](https://forums.syntaur.com/t/moog-prodigy-pitch-bend-pot/9560 "2026-09-20T08:06:19Z")

</div>

Is the 10k pitch bender pot replacement a direct pin for pin match or do the wires need to be soldered to different pins? Original on left replacement on right pins 1, 2, 3 from left to right in replacement.

---

## [Moog Prodigy Bushings Needed (Non Pratt-Read)](https://forums.syntaur.com/t/moog-prodigy-bushings-needed-non-pratt-read/9454)

<div class="topic-metadata">

**Author:** [@fattcamp](https://forums.syntaur.com/u/fattcamp)\
**Replies:** 3\
**Last updated:** [May 19, 2026, 9:59am UTC](https://forums.syntaur.com/t/moog-prodigy-bushings-needed-non-pratt-read/9454 "2026-05-19T09:59:48Z")

</div>

Moog Prodigy – (Bushings Needed - Non Pratt-Read Style) Hey guys, I’m fixing up a couple of Moog Prodigy’s and would like to replace the key bushings but they’re out of stock on Syntaur (Part #4269) and everywhere. The…

---

## [Moog Voyager Constant Drone](https://forums.syntaur.com/t/moog-voyager-constant-drone/9396)

<div class="topic-metadata">

**Author:** [@goldtoneworkshop](https://forums.syntaur.com/u/goldtoneworkshop)\
**Replies:** 0\
**Last updated:** [March 31, 2026, 8:35pm UTC](https://forums.syntaur.com/t/moog-voyager-constant-drone/9396 "2026-03-31T20:35:34Z")

</div>

Hey All, I’ve got a Moog Voyager in here that is constantly droning after a note is pressed even when the ENV. GATE switch is set to "keyboard”. I can get it to go away with the oscillator mix knobs turned all of the wa…

---

## [Moog Rogue - mod wheel pot taper?](https://forums.syntaur.com/t/moog-rogue-mod-wheel-pot-taper/9326)

<div class="topic-metadata">

**Author:** [@error\_trials](https://forums.syntaur.com/u/error_trials)\
**Replies:** 6\
**Last updated:** [January 30, 2026, 3:50pm UTC](https://forums.syntaur.com/t/moog-rogue-mod-wheel-pot-taper/9326 "2026-01-30T15:50:59Z")

</div>

I have a suspected bad potentiometer on my moog rogue mod wheel. The service manual lists it as a 10k “special taper” pot. Is it just an audio taper? I see the linear taper pot for the pitch wheel here on syntaur, but…